NITROSTAN UNIVERSAL PRIMER SURFACER
Also referred to as a Finishing Primer. This primer has very fast
dry and excellent sanding properties. It gives an ultra-smooth surface when
sanded to produce a superior finish when painted.
Light Grey 7005, Charcoal 7008, Oxide Red 7009
Also known as a finishing primer. This product is fast drying and easy to sand to a smooth surface.
PROCEDURE FOR REPAIRING SCRATCHES::
When satisfied with the sanding of the Spot & Glazing Putty, clean the area of the sanding residue, wipe dry and clean again with a tack cloth. Spray the entire repair area with a medium coat of primer. Allow the primer to flash dry for about 5-10 minutes before wet sanding with #400 grit sandpaper. Repeat this process several times until the repair area is glassy smooth. It is now ready for painting.
PROCEDURE FOR REPAIRING NICKS:
When satisfied with the sanding of the Spot & Glazing Putty, clean the area of the sanding residue, wipe dry and clean again with a tack cloth. Completely cover the puttied area and several inches of the old finish around it. Allow the primer to flash dry for about 5-10 minutes before wet sanding with #240 grit sandpaper. Repeat the process of cleaning and priming once or twice more. Between coats, wet sand lightly with #400 grit sandpaper. The surface is now ready for painting.
PROCEDURE FOR REPAIRING SURFACE RUST:
When satisfied with the sanding of the Spot & Glazing Putty, clean the area of the sanding residue, wipe dry and clean again with a tack cloth. Completely cover the puttied area and several inches of the old finish around it. Allow the primer to flash dry for about 5-10 minutes before wet sanding with #240 grit sandpaper. Repeat the process of cleaning and priming once or twice more. Between coats, wet sand lightly with #400 grit sandpaper. The surface is now ready for painting.
PROCEDURE FOR REPAIRING MINOR DENTS:
When satisfied with the sanding of the Spot & Glazing Putty, clean the area of the sanding residue, wipe dry and clean again with a tack cloth. Completely cover the puttied area and several inches of the old finish around it. Allow the primer to flash dry for about 5-10 minutes before wet sanding with #240 grit sandpaper. Repeat the process of cleaning and priming once or twice more. Between coats, wet sand lightly with #400 grit sandpaper. The surface is now ready for painting.